Home / Tools / Nail Pullers / Nail Pullers
Browse
atd tools
ATD Tools ATD-3039 Late Model Harmonic Dampener Puller and Holding Tool Set ATD-3039 Late Model Harmonic Dampener Puller and Holding Tool Set Designed for removing dampener pulleys on late model vehicles in tight engine compartments, without removing the radiator Kit contains: 3-jaw puller with a 3/4" hex for wrench or socket use (3) lengths of forcing rods Forcing screw with 3/8" square drive for ratchet use Chrysler harmonic balancer holding tool Use on the following: General Motors: 1997 and later 5.7L V8 engines including Camaro, Corvette and Firebird 2000 and later 4.8L, 5.3L, 6.0L and 8.1L V8 engines 1988 and later Cadillac 4.5L, 4.6L, and 4.9L V8 engines 1995 and later Oldsmobile 4.0L V8 engines 2003 and later 4.2L I6 engines 2004 and later 3.5L I5 engines 2005 and later 2.8L I4 engines Chrysler: 1990 and later 2.0L and 2.4L 4-cylinder engines 1990 and later 2.5L, 2.7L, 3.3L, 3.5L and 3.8L V6 engines Ford: 1995 and later V8 engines with 3-spoke pressed-on dampener Mitsubishi: 1995-99 Eclipse 2.0L DOHC non-turbo engines Molded storage case included Manufacturer: ATD Tools Manufacturer Part No: ATD-3039 UPC Code: 663126030391
Price: $82.95
stanley consumer tools
Fatmax Fubar III, 30", Utility Bar, The Ultimate 8 In 1 Demolition Tool, Prying, Splitting, Board Bending & Heavy Striking Jobs, Superior Leverage, Sledge Hammer Face, 2 Tier Board Grabber Standard Framing & Decking, Nail Puller & Pry Bar, Textured Rubber Grip, Also Has Hydrant Wrench & Gas Shut Off Wrench.
Price: $76.55
atd tools
ATD Tools ATD-3045 Slide Hammer Puller Set ATD-3045 Slide Hammer Puller Set Eases removal of flange-type axles, oil seals, bearings and other press fit parts Jaws can be set up for 2- or 3-jaw internal or external pulling jobs 5 lbs. heavy-duty hammer 8-function internal or external 3-jaw puller Internal or external 2-jaw puller Puller hook, rear axle puller Dent puller Special grip wrench adapter 5/8" x 18 threaded end Molded storage case included Shipping Weight: 14.2 lbs Manufacturer: ATD Tools Manufacturer Part No: ATD-3045 UPC Code: 663126030452
Price: $72.95
fulton
The Wrecker, 36" Heavy Duty Wrecker Bar, Unique Rocker Head Creates More Power Without Blocking, Extra Long Pull, No Reversing Of Bar Necessary, Push & Pull With Equal Force.
Price: $35.34
truper herramientas
60"L x 1-1/4"D, Pinch Point Rat Tail Crow Bar, 18 LB Capacity.
Price: $29.21
sterling
Flat Pry Bar The flat pry bar is extra tough and durable. Works great on the toughest jobs! Can be used to remove nails or pry apart boards and other objects. Has both a flat end and a curved end. Comes packaged loose with an artwork label. Measures 1 1/8" x 10". This item is sold in case packs only! The minimum case package for this item is: 24 Colors: red Materials: metal Manufacturer: Sterling MPN: AB045 UPC Code: 731015164752
Price: $29.62
bulk buys
Easy Reach Grabber Tool Lightweight and durable, Easy reach grabber tool has a 33" reach. Reduces risk from falling from stepladder. Product comes in wrap around packaging with upc. Colors: orange Materials: metal , plastic Manufacturer: Bulk Buys MPN: MT550 UPC Code: 731015140312 Sold by the case! Minimum Case Pack - 24
Price: $29.62
atd tools
ATD Tools ATD-7495 2 Ton Power Pull ATD-7495 2-Ton Power Pull Hardened steel pivot points and swivel yoke Cadmium plated steel frame and cable guard High alloy aluminum ratchet wheel Notch-at-a-time automatic safety release Heavy-duty aircraft cable, slip hook and durable plastic hand grips Leverage: 36:1 Capacity (Ton): 2 Maximum Pull: 5 ft. Cable: 3/16" Shipping Weight: 8.9 lbs. Manufacturer: ATD Tools Manufacturer Part No: ATD-7495 UPC Code: 663126074951
Price: $30.02
dasco
12 Piece, Punch & Chisel Kit, Contains 6 Pin Punches In Sizes 1/16", 1/8", 5/32", 3/16", 1/4" & 5/16", 3 Cold Chisels In Sizes 5/16", 5/8" & 3/4" & 1 Each 3/8" Prick Punch, 1/4" Center Punch & 7" Long Scratch Awl, The Cold Chisels Feature The Targethead&tm. Design To Reduce Spalling & Mushrooming.
Price: $26.02
truper herramientas
51" Long 1-1/8" Diameter Pinch Point Rat Tail Crow Bar, 12 LB Capacity.
Price: $23.25
bulk buys
Super Grip Bath Handle The super grip bath handle fits any shower or bath. Mounts to any non-porous surface. No need for holes, screws or tools! Features suction cups with push levers and a contoured handle. Can be placed in horizontal or vertical positions. Handle is white with olive green levers. Comes packaged in a sturdy box for easy shelf display. Measures approximately 11 3/4". Colors: white , green Materials: plastic , rubber Manufacturer: Bulk Buys MPN: OB647 UPC Code: 731015162680 Sold by the case! Minimum Case Pack - 4
Price: $23.53
mayhew steel
3 Piece, Lady Foot Pry Bar Set, Includes: #424, Size 7/16, 12" Length, #426, Size 9/16, 16" Length & #428, Size 11/16, 21" Length, Curved End Ensures Better Leverage In Small Areas, Pointed End For Aligning Work, Works With Wood, Metal Or Plastic.
Price: $22.73
fulton
The Wrecker, 30" Wrecking Bar, Heavy Duty Craftsmanship, Unique Rocker Head Creates More Power Without Blocking, Extra Long Pull, No Reversing Of Bar Necessary, Push & Pull With Equal Force.
Price: $21.36
mayhew steel
3 Piece, Dominator Pry Bar Set, Includes: 7", 7C Awl Dominator Pry Bar, 12", 12C Awl Pry Bar & 18", 18C Awl Pry Bar, Patented Dominator Design Provides Comfortable & Secure Grip, Shaft Goes Through The Handle For Prying Power, Capped End In Direct Contact With The Shaft For Strength, Capped End Allows User To Strike The Prybar Without Damaging The Bar.
Price: $20.95
mayhew steel
2 Piece, Dominator Pry bar Set, Includes: 18", 18C Awl Dominator Pry Bar & 24", 24C Awl Pry Bar, Patented Dominator Design Provides Comfortable & Secure Grip, Shaft Goes Through The Handle For Prying Power, Capped End In Direct Contact With The Shaft For Strength, Capped End Allows User To Strike The Prybar Without Damaging The Bar.
Price: $19.29
Top Sellers
dasco
24" Shingle Ripper, Will Remove A Single Shingle Without Damaging Either The Piece Removed Or Surrounding Pieces. For All Types Of Shingles, High Carbon Steel.
Price: $16.66
Home | Help | Your Account | About Us | Terms & Conditions | Privacy Policy | Site Map | TOC | Sell
Copyright © 2012 Underbid, Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.
